Samsung AJ***JCJ2CH Installation Manual page 24

A S etting an indoor unit address and installation option
Setting Option
(
AJ
Entering mode for
setting option
High Temp Button
Low Temp Button
Setting Option
1. Remove batteries from the remote controller
2. Insert batteries and enter the option setting mode while pressing High Temp button and Low Temp button.
3. Each time you press Low Fan button, 7-seg on left side is increased by "1" and each time you press High Fan button,
7-seg on right side is increased by "1"
4. You press button to move to the next setteing page.
5. After setting option, press
6. Press operation button
EX) Set the each option separately since you cannot set the ADDRESS setting and indoor unit
installation setting option at the same time.
24
)
JNN /AJ JNA
button to check whether the option code you input is correct or not.
with the direction of remote control for set.
Option
setting mode
Mode change
High Fan Button
Low Fan Button