Using the test pattern
The projector is capable of displaying the grid test
pattern. It can be used to assist you with the
adjustment of image size and focus, ensuring that the
projected image is free from distortion.
To display the test pattern, open the OSD menu and
go to the System Setup: Advanced > Test
Pattern and press ◄/► to select On.
Using the quick install
The projector provides a hot key to set Projector Installation, Test Pattern, and
Keystone quickly.
Press Quick Install on the remote control and press ▲/▼ to select:
•
Projector Installation: See
•
Test Pattern: See
•
Keystone: See
46
Operation
"Positioning your projector" on page
"Using the test pattern" on page
"Correcting Keystone" on page
16.
46.
30.