Table of Contents
Advertisement
Magnifying and searching for details
If you need to find the details on the projected picture, magnify the picture. Use the
direction arrow keys for navigating the picture.
1.
Press MENU and then press ◄/► until the Display menu is highlighted.
2.
Press ▼ to highlight Digital Zoom and press ENTER. The Zoom bar displays.
3.
Press ▼ on the projector repeatedly to magnify the picture to a desired size.
4.
To navigate the picture, press ENTER to switch to the paning mode and press the
directional arrows (▲, ▼, ◄, ►) to navigate the picture.
5.
To reduce size of the picture, press ENTER to switch back to the zoom in/out
functionality, and press AUTO to restore the picture to its original size. You can
also press ▼ repeatedly until it is restored to the original size.
The picture can only be navigated after the picture is magnified. You can further magnify the
picture while searching for details.
Selecting the aspect ratio
The 'aspect ratio' is the ratio of the image width to the image height. Most analog TV and
computers are in 4:3 ratio, and digital TV and DVDs are usually in 16:9 ratio.
With the advent of digital signal processing, digital display devices like this projector can
dynamically stretch and scale the image output to a different aspect than that of the image
input signal.
To change the projected image ratio (no matter what aspect the source is):
•
Using the remote control
1.
Press Aspect to show the current setting.
2.
Press Aspect repeatedly to select an aspect ratio to suit the format of the video
signal and your display requirements.
•
Using the OSD menu
1.
Press MENU and then press ◄/► until the Display menu is highlighted.
2.
Press ▼ to highlight Aspect Ratio.
3.
Press ◄/► to select an aspect ratio to suit the format of the video signal and your
display requirements.
36
Operation
Advertisement
Table of Contents
