Changing The Channels - Sharp Aquos LC-20B1U Operation Manual

BASIC OPERATION (Continued)
Changing channels by using Channel Select on the remote control
is LCD TV set allows you to select up to 125 channels (1 to 125). To select a channel, enter a 2-
3-digit number.
Channel
Select
To select a 1- or 2-digit channel
number (e.g., Channel 5):
Complete the following procedure
within 4 seconds.
1
Press the
®
button.
2
Press the
®
button.
I
Note :>
@
When selecting a i-digit channel number,
do not fail to press the
®
button first.
To select a 3-digit channel number
(e.g., Channel 115):
Complete the following procedure
within 4 seconds.
1
Press the
@
button.
2
Press the
G)
button.
:3
Press the
®
button.
I Note_>
@
The 3 -digit channel number can be
selected only when the receiving mode is
set to CABLE in CH-SETTING. (For details
on setting the receiving mode, see page
25.)
5
Changing channels with CH (A)/(V) on the remote control
Air Press CH (A) and the channels change in the order shown below:
2 -) 3 -) ... -) 68 -) 69 -) 2 -) 3 -> ...
Press CH (v) and the channels change in the order shown below:
3 --) 2 -> 69 --> 68 --) . . . -) 3 -> 2 -) ...
Cable Press CH (A) and the channels change in the order shown below:
1 -) 2 -) 3 -) . . . -) 125 -) 1 -) 2 -) 3 -) . . .
Press CH (v) and the channels change in the order shown below:
3-)2-)1-)1~-)
... -)3-)2-)1-) ...