Preparation; Pulling Out The Pc Card Adapter - Sharp Aquos LC-20B1U Operation Manual

MEMORY CARD PLAYBACK (Continued)
SHARP
1
Insert the memory card
(commercially available) on which
images have been recorded into the
PC card adapter (commercially
available).
2
Press POWER to turn off the LCD
TV.
CAUTION:
Always turn off the LCD TV before
plugging in or unplugging the PC
card adapter or memory card. (Never
plug in or unplug the PC card
adapter or memory card during card
playback.)
3
Slowly insert the PC card adapter
into the PC card slot on the main
unit.
After inserting the PC card adapter,
lower the card release lever.
(For details on the card release lever,
see the figure in the column below.)
NOTE:
With its cutout positioned at the top
right, insert the PC card adapter
firmly.
I
Note
>
@
Use the appropriate PC card adapter
(commercially available) for the memory card.
@
Use the PC card adapter recommended by the
manufacturer of the memory card in question to
load images from the recording media that have
been shot using a digital camera. (The name
differs depending on the manufacturer.)
@
For details. refer to the operation manuals for
the digital camera and PC card adapter.
*
Example of inserting a
memory card into a PC
card adapter.
Cutout
*
Insert the PC card adapter
correctly in the direction
shown by the arrow.
*
Be sure to insert the card
straight.
1
Press POWER to turn off the LCD TV.
2
Raise the card release lever horizontally.
3
Press the lever straight on.
Card release lever
4
Pull out the PC card adapter.
PCCmd<