Guarantee And Clauses - Alcatel-Lucent OmniTouch 8082 User Manual

Guarantee and clauses

Safety Instructions
Changes or modifications to the equipment not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Intellectual Property Rights
When released from the manufacturing plant, the audio files hosted on My IC Phone are Alcatel-Lucent property
and can be used as is. When a installer or End-User downloads MP3 files via a USB link, they are responsible for
the Intellectual Property Right requirements related to such downloads.
To limit the risk of interference, people with pacemakers must keep the wireless telephone away from their
equipment (minimum distance of 15 cm/6 inches).
It is recommended to follow the standard acceptance procedures before using this equipment in human safety
critical areas (hospitals...).
The handset includes magnetic elements that may attract sharp metallic objects. To prevent injury, before each
use ensure sharp metallic objects are not stuck to the earpiece.
There is a danger of explosion if the battery is replaced incorrectly - use only the battery with the reference
3GV28041AB (1.2V 1500 mAh) 3GV28041AB (1.2V 1500 mAh) (Bluetooth Handset only).
Battery charge (Bluetooth Handset only) : Charge the battery for about 16 hours before initial use.
Avoid using phones (other than a cordless type) during an electrical storm. There may be a remote risk of electric
shock from lightning
Do not use the device in environments where there is a danger of explosion
Do not plug this phone into an Integrated Services Digital Network (ISDN) connection or into a regular Public
Switched Telephone Network (PSTN) connection. This can result in severe damage to the phone
Never allow your telephone to come into contact with water
To clean your telephone, use a soft damp cloth. Never use solvents (trichlorethylene, acetone, etc.) which may
damage the plastic parts of your telephone. Do not use aerosol cleaners.
This product is intended to be connected to the PABX via the LAN (10/100/1000 BT); it is supplied, either via the
Ethernet (LAN) port (Minimum Class 3 according to IEEE802.3af), or via DC-in by a Certified Direct Plug-In or
Cord-connected Power Unit approved as "LPS" (Limited Power Source) against CSA/UL/IEC 60950-1 and rated
48V dc, minimum 0.27A. Allowed power supply is: Asian Power Devices model WA-13B48R
If you are connected to a POE connection do not use AC power supply
Regulatory Statements
Marking
This equipment is in compliance with the essential requirements of R&TTE Directive 1999/5/EC and with Directive
2011/65/UE (ROHS).
The Declaration of Conformity may be obtained from: Alcatel-Lucent 3 avenue Octave Gréard 75007 Paris, France
Contact: ebg_global_supportcenter@Alcatel-Lucent.com.
USA and Canada
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to
the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
howtoc
61