6.3.1 Add/Edit Rogue/Friendly List
Click Add or select an AP and click the Edit button in the Configuration > Wireless > MON
Mode table to display this screen.
Figure 38 Configuration > Wireless > MON Mode > Add/Edit Rogue/Friendly AP List
Each field is described in the following table.
Table 34 Configuration > Wireless > MON Mode > Add/Edit Rogue/Friendly AP List
LABEL
MAC
Description
Role
OK
Cancel
6.4 Load Balancing
Use this screen to configure wireless network traffic load balancing between the APs on your
network. Click Configuration > Wireless > Load Balancing to access this screen.
Figure 39 Configuration > Wireless > Load Balancing
Chapter 6 Wireless
DESCRIPTION
Enter the MAC address of the AP you want to add to the list. A MAC address is a unique
hardware identifier in the following hexadecimal format: xx:xx:xx:xx:xx:xx where xx is
a hexadecimal number separated by colons.
Enter up to 60 characters for the AP's description. Spaces and underscores are allowed.
Select either Rogue AP or Friendly AP for the AP's role.
Click OK to save your changes back to the NWA/WAC.
Click Cancel to close the window with changes unsaved.
NWA5000 / WAC6500 Series User's Guide
71