Vlan - ZyXEL Communications NWA5121-N User Manual

Table 29 Configuration > Network > IP Setting (continued)
LABEL
IPv6 Address
Assignment
Enable Stateless
Address Auto-
configuration
(SLAAC)
Link-Local
Address
IPv6 Address/
Prefix Length
Gateway
Metric
DHCPv6 Client
DUID
Request Address
DHCPv6 Request
Options
DNS Server
NTP Server
Apply
Reset

5.3 VLAN

This section discusses how to configure the NWA/WAC's VLAN settings.
Figure 32 Management VLAN Setup
Chapter 5 Network
DESCRIPTION
Select this to enable IPv6 stateless auto-configuration on the NWA/WAC. The NWA/WAC
will generate an IPv6 address itself from a prefix obtained from an IPv6 router in the
network.
This displays the IPv6 link-local address and the network prefix that the NWA/WAC
generates itself for the LAN interface.
Enter the IPv6 address and the prefix length for the LAN interface if you want to use a
static IP address. This field is optional.
The prefix length indicates what the left-most part of the IP address is the same for all
computers in the network, that is, the network address.
Enter the IPv6 address of the default outgoing gateway using colon (:) hexadecimal
notation.
Enter the priority of the gateway (if any) on the LAN interface. The NWA/WAC decides
which gateway to use based on this priority. The lower the number, the higher the
priority. If two or more gateways have the same priority, the NWA/WAC uses the one
that was configured first.
Select this option to set the NWA/WAC to act as a DHCPv6 client.
This field displays the DHCP Unique IDentifier (DUID) of the NWA/WAC, which is unique
and used for identification purposes when the NWA/WAC is exchanging DHCPv6
messages with others. See
Select this option to determine what additional information to get from the DHCPv6
server.
Select this option to obtain the IP address of the DNS server.
Select this option to obtain the IP address of the NTP server.
Click Apply to save your changes back to the NWA/WAC.
Click Reset to return the screen to its last-saved settings.
B
A
NWA5000 / WAC6500 Series User's Guide
61
Appendix B on page 201 for more information.