Connecting A Monitor - Fujitsu ESPRIMO P7XX Operating Manual

Connecting a monitor

Depending on requirements, you can use the monitor ports of the mainboard (1) or the monitor ports
of an optional display adapter in one of the board slots (2) to connect a monitor to your device.
1 = Mainboard monitor ports
► Follow the instructions contained in the monitor manual to prepare the monitor
for operation (e.g. connecting cables).
► Connect the data cable to a suitable monitor port of the device (VGA, DVI-I, DisplayPort).
The monitor power cable may only be connected to the monitor socket of the device
if the monitor current consumption is less than 1.0 A at 230 V or 2.0 A at 100 V.
The values for the monitor current consumption can be found in the technical
data on the monitor or in the operating manual for the monitor.
► Depending on your device configuration level, plug the monitor power cable into either
the monitor socket of the device (1) or a grounded power outlet (2).
When you connect the monitor to the monitor socket of the device, it automatically
switches off as soon as the device switches off.
Fujitsu
2 = Monitor ports of the display adapter
1
Getting started
1
2
2
17