Setting Projected Course; Nav 2 Screen Setup; Cdi/Units/Alarms Function - Magellan NAV 6500 User Manual

Setting Projected Course

The position of the boat can be projected ahead in time based
on current COG and SOG. The projected course is repre-
sented by a solid line extending from the boat in the direction
of its COG and terminated with an
Press the Aux softkey, use the CURSOR
KEY to highlight Navigation Setup and
press ENTER. Use the CURSOR KEY to
highlight Projected Course and press EN-
TER. The course can be projected ahead
over 2 min., 10 min., 30 min., 1 hour, or
2 hours. Use the CURSOR KEY to highlight and EN-
TER to accept. Press ESC to exit.
Default setting: OFF

NAV 2 Screen Setup

The NAV 2 screen can be customized to display six different
navigation parameters chosen from a list of 12.
Press the Aux softkey, use the CUR-
SOR KEY to highlight Navigation
Setup and press ENTER. Use the
CURSORY KEY to highlight Nav
2 Screen Setup and press ENTER.
Use the CURSOR KEY to select
the parameter you wish to change
Magellan NAV 6500/NAV 6510
.
OFF
2 min.
10 min.
30 min.

CDI/Units/Alarms Function

1 hour
2 hours
Nav2 Screen Setup
BRG Set
COG SOG
CTS STR
Drift TRN
DTG VMG
SOA XTE
and press ENTER.
Use the CURSOR KEY to highlight one of the following
parameters: BRG, COG, CTS, Drift, DTG, SOA, Set,
SOG, STR, TRN, VMG, XTE. Press ENTER to accept.
Use the same procedure to change as many parameters as
you wish. Press ESC twice to exit.
Default settings: SOG, DTG, XTE, COG, CTS, STR
This menu allows you to set CDI scale, choose distance, speed
and depth units, and set alarms for arrival radius, anchor, cross
track error and test.
CDI Scale
Distance Units
Speed Units
Depth Units
Alarm Activated
Arrival Radius
Anchor Alarm
XTE Alarm
Test Alarm
0.5 Nm
Nm
Kts
Ft
ON
OFF
OFF
OFF
OFF
43