Multi-Leg Routes; Creating A Multi-Leg Route Using The Map; Creating A Multi-Leg Route (Text Mode) - Magellan NAV 6500 User Manual

Press ESC.
The Exit from GOTO confirmation window appears.
Highlight YES and press ENTER.
The GOTO is deleted.

Multi-leg Routes

The receiver allows you to create multi-leg routes, which can
be used again and again, activated, deactivated, reversed, ed-
ited, copied or deleted.

Creating a Multi-Leg Route Using the Map

Routes Create
Move cursor
to leg destination
Repeat for each leg in the route
Note: If the start waypoint or any leg destination waypoint is not in
the receiver's memory, you will be given a window allowing you to
create the new waypoint.
Use this function to create a route from existing waypoints
or create them as you go on the screen.
30
Move cursor
ENTER
to start wpt
Done Done
ENTER
From any root screen, press the Routes, Create softkeys.
Move the cursor over the starting waypoint and press EN-
TER.
Now move the cursor over the next waypoint in the route
and press ENTER. A line appears on the map, connecting
the first point to the second, and so on. Continue to add
waypoints to the route until you have completed it, then
press the Done softkey.
Press ESC to exit the routes function.
To add a leg to the route at a location where no waypoint
yet exists, see Appending a Waypoint.

Creating a Multi-Leg Route (Text Mode)

Routes Create Txt Crt
Select
ENTER
Waypoint
Highlight
next field
Repeat for each leg in the route
Done Done
Modify or
Accept Default
Comment
ENTER
Select
ENTER
Waypoint
Magellan NAV 6500/NAV 6510
Highlight
start field
ENTER