Sony Ipela Application Manual page 26

(playback)
To start playback, open the recorded file or another
audio file and click this icon.
You can check the recorded sound or the contents of the
selected audio file. During playback, the progress bar
shows playback progress.
(stop)
Click to stop recording or playback.
When you click it during recording, recording stops, and
you can review the recorded sound or upload the
recording to the camera.
When you click it during playback, playback stops and
the progress bar returns to the start position.
(recording)
Click to start recording of sound via the computer's
microphone. Maximum recording time is 30 seconds.
The codec specified in the Setting tab is used for the
recording.
The recorded file is displayed as "RecordedFile.vof".
Notes
• Recording or playback stops if you switch the tab
during recording or playback.
• The recorded file is not stored in the computer.
Recording/playback progress bar
You can check recording or playback progress with this
bar.
During recording, the far right of the bar represents
30 seconds, and the remaining recording time is
numerically displayed below the bar.
During playback, the length of the bar depends on the
recorded time.
(file open)
Click to select a previously saved audio file. You can
play the selected audio file or upload it to the camera.
(save)
Click to save a recorded audio file to the computer.
Voice alert number select
26
Using the SNC audio upload tool
Specify the voice alert number to which you want to
upload an audio file. For example, select 1 when
uploading to voice alert 1.
The name of the uploaded audio file is displayed to the
right of the number.
"Not uploaded" is displayed if no audio file is uploaded
to the camera.
The audio file name will be "RecordedFile" + "Voice
alert number" + ".vof" if you upload an audio file
recorded using and not stored in the computer.
Note
The audio file name for the camera selected in the
camera list is displayed here. To check the uploaded file
name, click on the camera in the camera list.
(upload)
Click to upload the recorded or selected audio file to the
camera specified in the Setting tab. Only one audio file
can be uploaded to the camera at a time.
Note
Uploading a new audio file overwrites the audio file
previously uploaded to the camera.
Click this button to hide the camera list. Click it again to
display the camera list.
Target camera(s) (Camera list)
Displays the cameras selected with the camera select
checkbox of the camera list in the Setting tab.
The list shows information and status of selected
cameras.
IP address: Displays the IP address of a network
camera. "DHCP" is shown at the end of the IP
address when the IP address is obtained from a
DHCP server.
Tips
• During SSL communication,
side of the IP address of the camera.
• The model on sale in China does not support the SSL
function.
Model: Displays the model name of the network
camera.
Serial: Displays the serial number of the network
camera.
Progress: Displays the progress of audio file
transmission.
Status: Displays the current status of the camera.
Ready: The camera is ready for connection.
Inquiry: Camera information is being requested.
appears on the left