Sony IMX035 Installation & Operation Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. IP Camera
  5. IMX035
  6. Installation & operation manual
Sony IMX035 Installation & Operation Manual

Sony IMX035 Installation & Operation Manual

Mega-pix box ip camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

INSTALLATION &
OPERATION MANUAL
Mega-Pix Box
IP Camera
Before trying to connect or operate this product, please read this manual completely

Advertisement

Table of Contents
loading

Related Manuals for Sony IMX035

Summary of Contents for Sony IMX035

  • Page 1 INSTALLATION & OPERATION MANUAL Mega-Pix Box IP Camera Before trying to connect or operate this product, please read this manual completely...

  • Page 3: Table Of Contents

    Table Of Contents SAFETY PRECAUTIONS ................3 1. PRODUCT FEATURES................4 1.1 P ..............4 RODUCT NSTRUCTIONS 1.2 P ................5 RODUCT EATURES 2. DESCRIPTION OF THE FRONT/REAR VIEW .........8 2.1 F ............8 RONT ANEL AND ANEL 2.2 ALARM I/O ..................9 2.3 F ..................10 LANK ANEL 2.4 T...
  • Page 4 5.1 M ............24 ICROSOFT NTERNET XPLORER 5.1.1 Connecting the IP camera ........................24 5.1.2 Live Video ............................25 5.1.3 Setup..............................29 6. ADVANCED OPERATION ..............80 7. SPECIFICATIONS...................82 8. Functions of client PC................83 APPENDIX 1. –How to run IP Camera UPnP ...........84 APPENDIX 2. –The ARP function .............94 APPENDIX 3.

  • Page 5: Safety Precautions

    SAFETY PRECAUTIONS All the following safety and operational instructions to prevent harm or injury to the operator(s) or other persons should be read carefully before the unit is activated. WARNING To prevent fire or shock hazard, avoid exposing this unit to rain or moisture. Do not block ventilation openings.

  • Page 6: Product Features

    PoE functions. The images from this device are not interlaced. The camera sensor used is the SONY 1.3M CMOS Sensor (IMX035). In addition this IP camera hosts the powerful multi-profile function which enables the simultaneous use of different rates of resolution while allowing two video codecs to connect with computers at the same time.

  • Page 7: Product Features

    1.2 Product Features Camera: Image sensor: SONY 1.3M CMOS Sensor (IMX035) Minimum Illumination: Color 0.2 lux@F1.2 Lens type: CS (C mount adaptor can be used) Shutter time: AES:1/30 ~1/1000 Auto iris type: DC drive Exposure: AES/Auto-iris Day & Night: Mechanical IR filter Day &...
  • Page 8 Alarm: Motion Detection Alarm triggers: Schedule Alarm input System Boot Alarm application: SD recording SMTP Network Storage CMS recording Alarm duration: Programmable Schedule counts: Hardware: Processors: Texas Instruments DaVinci DDR RAM DDRII 1Gbit Flash Memory 256Mb Real-time clock: Built-in Real-time clock battery: Built-in Watchdog: Built-in...
  • Page 9 Device Indicator: Ethernet Link: Ethernet Active: System Operation: System Warning: Port functions: 10/100BaseT ports x 1 Following are compliant standards: -IEEE 802.3 compliance -IEEE 802.3u compliance -MDI/MDIX auto-negotiation -IEEE 802.3af standards (PoE) I/O connector 12 pin-connector terminal block： -1 x alarm input (4pins) -1 x alarm output (2pins) -1 x audio input (1pin) -1 x audio output (1pin)

  • Page 10: Description Of The Front/Rear View

    2. DESCRIPTION OF THE FRONT/REAR VIEW 2.1 Front Panel and Rear Panel -- Front Panel -- -- Rear Panel -- ETHERNET AC 24V (PoE) DC 12V VIDEO RESET SD / SDHC 7 8 9 10 11 12 1. Light Sensor: Registers the quality of light in the camera’s environment, and controls the iris shuttle to provide better information concerning the light.

  • Page 11: Alarm I/O

    2.2 ALARM I/O 1 & 2. ALARM OUT (OUTPUT): This is an alarm output trigger. Connect this to external 5V, 20mA devices such as buzzers or lights. ( 0V(Active) 3 & 4. ALARM IN 1 (INPUT): This is an alarm input that can be programmed in the menu 5V, 20mA system to active low.

  • Page 12: Flank Panel

    2.3 Flank Panel IRIS 1.ALM-OUT A 7.RS-485:D+ 1. AES 2.ALM-OUT B 8.RS-485:D- 2. DC IRIS 3.ALM-IN + 9.DC-OUT(5V) 4.ALM-IN - 10.GND 3. DHCP 5.ALM-RST + 11.AUDIO-IN 4. STATIC IP 6.ALM-RST - 12.AUDIO-OUT 1. IRIS: Auto iris connector. This camera works with a DC drive auto iris lens. Please refer to the pin assignment marked on the camera when connecting the auto iris lens 2.

  • Page 13: The Usb Function

    2.4 The USB function By connecting the IP camera with a PC via the USB connector, the IP camera can provide two different functions. 1. Insert an SD card: As a card reader. Insert an SD card into the IP camera, then connect to the PC. You might transfer files between the SD card and the PC.

  • Page 14: Installation

    3. INSTALLATION Please follow the instructions and the diagram below to set up the system. NOTE: The IP Camera is linked by its Video Out connection via a BNC connector to a monitor's Video In connection. If this connection is there, you can see some information on the monitor screen, such as the IP Camera factory default Static IP address (192.168.1.168).

  • Page 15: Connecting With A Multiplexer

    3.3 CONNECTING WITH A MULTIPLEXER LAN CAMERA 1 LAN CAMERA 2 TO LAN CAMERA VIDEO OUT BNC CONNECTOR LAN CAMERA 16 3.4 UPDATING SYSTEM SOFTWARE If the system software of the IP Camera needs to be upgraded, please take the following steps to safely process it.
  • Page 16 9. Power off the IP Camera when this update process is finished, then remove the SD card from the IP Camera. 10. Reconnect the Ethernet cable to the RJ-45 port if necessary. 11. Power ON the IP Camera and it will work normally if the entire update procedure goes correctly. 12.

  • Page 17: Network Configuration

    4. Network Configuration 4.1 Cable Connections Please follow the instructions below to connect your IP camera to a computer or a network and to choose a proper RJ-45 cable configuration for connections. Physical specifications of the RJ-45 cable for Ethernet Wire Type Cat.
  • Page 18 NOTE: When only one unit of the IP camera is connected to a computer or LAN, you can freely assign an IP address for the IP camera. For example, there is a range of IP camera IP addresses from 192.168.1.1 to 192.168.1.255. You can pick one for use from the range of the IP.

  • Page 19: Tcp/Ip Communication Software

    4.3 TCP/IP Communication Software Follow the procedure below to install the TCP/IP communication program in your computer. Click Start, and then click Control Panel. Double click the Network Connections icon to enter the windows.
  • Page 20 Right-click your network connection, and then click Properties. On the General tab, check if the Internet Protocol (TCP/IP) is included in the list. If the TCP/IP is included, please process section 4.5. If it is not included, please follow section 4.4 to install the TCP/IP.

  • Page 21: Tcp/Ip Installation

    4.4 TCP/IP Installation On the General tab of the Connection Properties, under “This connection uses the following items”, click Internet Protocol (TCP/IP). Then click Install. Select Protocol from the network component type then click Add. Select Microsoft TCP/IP from the network protocol then click Click Close to return to the Network Connections window.

  • Page 22: Tcp/Ip Configuration Setting

    4.5 TCP/IP configuration setting Click Start > Control Panel > Network Connections. Select Internet Protocol (TCP/IP), and then click Properties. Before processing the IP camera installation in a WAN, please make sure the Internet connection works properly. If not, please contact your ISP provider. 　...

  • Page 23: Connection Testing

    4.6 Connection Testing With the previous settings, follow the instructions below to ensure whether you have established the connection successfully. Click Start > All Programs > Command Prompt. Enter ping XXX.XXX.XXX.XXX (the camera’s IP address), then enter. (See the sample screen below).
  • Page 24 If you receive a response as in the sample screen below, the connection hasn’t been successfully established. Please re-check all the hardware and software installations by repeating sections 4.4 and 4.5. If you still can’t establish the connection after rechecking, please contact your dealer.

  • Page 25: Operating Instructions For Image Software And Network

    5. Operating Instructions for Image Software and Network Two choices of software are available for linking with the IP camera: (1) the Microsoft Internet Explorer; and (2) the IP camera viewer software, a network browser in a PC which provides the functions of monitoring remote zones or watching recorded data through the TCP/IP protocol.

  • Page 26: Microsoft Internet Explorer

    5.1 Microsoft Internet Explorer 5.1.1 Connecting the IP camera Start up the Microsoft Internet Explorer, and then follow the steps below to connect the IP camera. Click on the URL block at the top of the window. Enter the URL address of the IP camera into the URL block and press the “Enter” button to enter the home page.

  • Page 27: Live Video

    5.1.2 Live Video The Live Video from the IP camera is displayed on the home page when your PC is online with the IP camera. There are also additional settings provided on the home page. The AJAX (default) and the ActiveX viewer types display different display formats on their home page. The AJAX viewer type: Non-IE browsers support (for the JPEG mode only).
  • Page 28 Alarm on-icon: When there is a detection of external devices such as a sensor, The icon will appear on the upper right corner warn the user. When an alarm is triggered, the icon will blink red Alarm on-icon: When there is a detection of external devices such as a sensor, the icon will appear on the upper right corner warn the user.
  • Page 29 The ActiveX viewer type: You can select from the available thumbnails for your option of taking a Snapshot, setting the Storage Folder, selecting the Full Screen mode, Recording, Listen, Talk and Zoom. Snapshot: Click on the button to take a snapshot. The icon will change to a blue color while working effectively.
  • Page 30 Digital output: Click on the button to start/stop digital output. The icon will change to a blue color while working effectively. Zoom: Click on the button to bring a popup “Zoom” window. The icon will change to a blue color while working effectively.

  • Page 31: Setup

    5.1.3 Setup Click on the Setup button on the home page to proceed to the advanced settings. 5.1.3.1 Wizard To quickly configure your IP Camera, click Wizard on the top of the Setup pages. This wizard will guide you through a step-by-step process to configure your new camera and connect the camera to the Internet.
  • Page 32 If your Internet Service Provider has provided you with connection settings, or you wish to set a static address within your home network, enter the accurate information for your static IP setting. Click Next to continue. Step 2: If you are using PPPoE, select Enable and enter your user name and password, otherwise select Disable and click Next to continue.
  • Page 33 Step 4: Enter a name for your camera and click Next to continue. Step5: Configure the correct time to ensure that all events will be triggered, captured and scheduled at the right time. Click Next to continue. Step 6: If you have selected DHCP, you will see a summary of your camera’s settings. Please note down all this information as you will need it for accessing your camera within the network.
  • Page 34 5.1.3.2 Change Image Setting Please follow the steps below to change the video setting through the network as necessary. A preview of the image will be shown in the window of Live Video. Click Submit to activate and save your changes. The Image Setup setting page 1.
  • Page 35 2. Adjust the “Viewer Type”. Click to choose the viewer type of the “AJAX” or “ActiveX” mode. 3. Adjust the ”Image Settings”, including “AGC”, “Exposure Time “, “Mirror”, “Flip”, “Power Line”, ”“White Balance”, “Brightness”, “Contrast”, “Saturation”, “Sharpness” and “WDR Level” as necessary.
  • Page 36 Mirror: The mirror stores the images reflected by it so it can be used for surveillance or to simply take your own picture. Flip: To flip the camera’s lens 180 degrees. Power Line Select 50 Hz or 60Hz that depends on your local electric utility configuration.
  • Page 37 The Audio and Video setting page 1. Click on the Audio and Video button to enter the Audio and video page to set the details of the device. You may configure video profiles with different settings for your camera. Hence, you may setup different profiles for your computer and mobile displays.
  • Page 38 3. Set the details of the audio functions. 4. Click on the Submit button to submit the new setting. Description of function keys: Mode: Choose the video format from “JPEG” or “MPEG4”. It can be either JPEG or MPEG4. In JPEG mode, the video frames are independent. However, MPEG4 consumes much less network bandwidth than JPEG.
  • Page 39 The Privacy Mask setting page Click on the Privacy Mask button to enter the Privacy Mask Area setting page. Mask 3 privacy area(s) on video to specify up to the area(s) on the camera's image to be blocked/excluded from recordings and snapshots. 1.
  • Page 40 5.1.3.3 Change the Network Setting Please follow the steps below to change the network setting through the network as necessary. Set the network options and IP address. Click on the Network button in the home page to enter the Network Setup page. The accessible networks here are the “PPPoE”, “Port Detail”, ”Traffic”, ”UPnP”, “Dynamic DNS”, “HTTPS”...
  • Page 41 Change the Network Setting — PPPoE. The “Network” page has, on its upper left, the “PPPoE” icon. Please follow the steps below to change the PPPoE setting through the network as necessary. Click on the PPPoE button on the upper left menu to enter the “PPPoE Settings” page. Active the “Enable”...
  • Page 42 Change the Network Setting — Port Detail. The “Network” page has, on its upper left, the “Port Detail” icon. It allows you to specify and reserve the ports for both the HTTP and RSTP streaming. Please follow the steps below to change the Port Detail setting through the network as necessary.
  • Page 43 Description of function keys: HTTP ports allow you to connect to the camera via a standard web HTTP Port browser. This port can be set to a number other than the default HTTP port 80. A corresponding port must be opened on the router. For example, if the port is changed to 8080, users must type in the web browser 'http://192.168.0.100:8080' instead of 'http://192.168.0.100'.
  • Page 44 Change the Network Setting —Network Traffic. The “Network” page has, on its upper left, the “Traffic” icon. Specifying the maximum download/upload bandwidth for each socket is useful when connecting your device to a busy or heavily loaded network. Please follow the steps below to change the setting through the network as necessary. 1.
  • Page 45 Change the Network Setting — DDNS. The DDNS (Dynamic Domain Name Server) will hold a DNS host name and synchronize the public IP address of the modem when it has been modified. The user name and password are required when using the DDNS service.
  • Page 46 Description of function keys: Enable DDNS Function: Checkmark to activate the function. (The Domain Name System) is an Internet service that translates domain names into IP addresses (i.e. 192.168.0.20). The address can be obtained from your ISP or network gateway. Server Address: Select your Dynamic DNS provider from the pull down menu or enter the server address manually.
  • Page 47 Change the Network Setting — HTTPS. The “Network” page has, on its upper left, the “HTTPS” icon. Please follow the steps below to change the HTTPS setting through the network as necessary. Click on the HTTPS button on the upper left menu to enter the “HTTPS Setting” page. Mark the “Enable HTTPS secure connection”...
  • Page 48 Methods of creating and installing the certificate: 1. Create self-signed certificate automatically Before using HTTPS for communication with the IP camera, a Create self-signed certificate automatically: (1) Enable HTTPS secure connection. (2) Select the “Create self-signed certificate automatically” option. (3) Click the Create button. (4) The new Certification Information will show in the third column on the HTTPS setting page.
  • Page 49 Change the Network Setting —Access List. The “Network” page has, on its upper left, the “Access List” icon. Please follow the steps below to change the Access List setting through the network as necessary. 1. Click on the Access List button on the upper left menu to enter the “Access List” page. 2.
  • Page 50 Deny List: Start IP Address The starting IP Address of the devices (such as a computer) which don’t have permission to access the video of the camera. End IP Address The ending IP Address of the devices (such as a computer) which don’t have permission to access the video of the camera.
  • Page 51 5.1.3.4 Change the System Setting Please follow the steps below to change the date and time of the system setting through the network as necessary. Set the Time and Date of the system 1. Click on the System button to enter the “Time And Date” page (default). From this section, you may automatically or manually configure, update and maintain the internal system clock for your camera.
  • Page 52 Description of function keys: Time Zone: Select your time zone from the drop-down menu. Enable Daylight Saving: Select this to enable the daylight saving time. Auto Daylight Saving: Select this option so that your camera will configure the Daylight Saving setting automatically. Set date and time manually: Select this option so that you may configure the Daylight Saving date and time manually.
  • Page 53 Change the System Setting — Digital Input &Output. You may enable the Digital Input (D/I) and Digital Output (D/O) feature and configure the source of events for your camera. 1. Click on the DI and DO button on the left side of the “System” page to enter the “DI and DO” page. 2.
  • Page 54 Change the System Setting — ICR. Please follow the steps below to change the IR cut function through the network as necessary. Click on the ICR button on the left side of the “System” page to enter the “ICR” page. For the “IR-Cut Removable filter trigger condition”, mark your options from “Automatic”, “Day Mode”, “Night Mode”...
  • Page 55 Change the System Setting — RS485 Setting. You may configure the RS-485 settings or communication specifications (baud rate, data bit, stop bit, and parity bit) for your camera. The RS-485 is a serial communication method for computers and devices. For your camera, the RS-485 is used to control a PAN/TILT device, such as an external camera enclosure, to perform the PAN and TILT movement.
  • Page 56 Data Bits: Either 7 or 8. It is a measurement of the actual data bits in a transmission. By default, the value is 8. Parity Bit: Choose from No, Even, and Odd. This is a simple form of error checking used in serial communication and you may use no parity.
  • Page 57 Change the System Setting — Users. You may modify the name and administrator’s password of your camera, as well as add and manage the user accounts for accessing the camera. You may also use this section to create the unique name and configure the OSD setting for your camera.
  • Page 58 Change the System Setting — Maintenance. Please follow the steps below to change the system setting through the network as necessary. Click on the Maintenance button on the left side of the “Date and Time” page to enter the “System” page.
  • Page 59 Change the System Setting — Update Firmware. Please follow the steps below to update the firmware through the network as necessary. Click on the Firmware Upgrade button on the left side of the “Date and Time” page to enter the “Firmware Upgrade”...
  • Page 60 1. Quit Internet Explorer and quit any instances of Windows Explorer. 2. Click Start, click Control Panel, and then double-click Internet Options. 3. On the General tab, click Delete Files under Temporary Internet Files. Select the Delete all offline content check box in the Delete Files dialog box, and then click 5.
  • Page 61 5.1.3.5 Change the Application Setting Please follow the steps below to change the application setting through the network as necessary. Change the Application Setting —Language Setting. Please follow the steps below to change the Language setting via the network as necessary. Click on the Language button on the left side to enter the “Language Setting”...
  • Page 62 Change the Application Setting —Motion Detection. Please follow the steps below to enable changes in the motion detection function of the alarm through the network as necessary. Set the motion detection: Click on the Motion Detection button on the left side of the Alarm to enter the “Motion Detection”...
  • Page 63 Change the Application Setting —Event. In this section, you can configure and schedule the recording setting for your IP camera. Click on “Add” to enter the setting pages of the Server, Media, Event and Recording to make the advanced settings. Or click on “Delete” to erase the settings. The Event Setup page includes 4 different sections: Server, Media, Event and Recording.
  • Page 64 Server: Click on the Add button in the Server column to enter the “Server” setting page. Enter the Server name, the unique name for a server. There are four kinds of servers supported. They are email server, FTP server, HTTP server and network storage. Set the details of the Email.
  • Page 65 to the instructions for the external FTP server for details. The folder privilege must be open for uploading. "Passive Mode": Check it to enable the passive mode in transmission. Set the details of the Network storage. Only one network storage is supported. "Network storage location": The path to upload the media.
  • Page 66 FTP: Select to send the media files to an FTP server when a trigger is activated. Server address: Enter the domain or IP address of the FTP server. Port: The default FTP server port is 21. It can also be assigned to another port number.
  • Page 67 SD card: Select to send the media files to an SD card when a trigger is activated. Insert your SD card first. To verify if the storage setting is correctly configured, click the Test button. The result will be shown in above this setting page (TEST OK or TEST ERROR).
  • Page 68 Media: Click on the Add button in the Media column to enter the “Media” setting page. Enter the Media name, the unique name for media. There are three kinds of media: snapshot, video clip and system log. Set the details of the Snapshot. "Source": Select the video source.
  • Page 69 limitations for video clip file. "Maximum duration": The maximum recording file duration in seconds. "Maximum file size": The maximum file size would be generated. Click on the System log to activate the function. Click on “Submit” to save, or click on “Don’t Submit” to go back to the Event main page. Media settings: Click Add under the Media column on Event Settings page to open the Media setting page.
  • Page 70 Snap_20090101_122030 The prefix file name Date and time suffix The format is: YYYYMMDD_HHMMSS Add date and time suffix to file name: Select the option to add the date/ time suffix to the file name. Click Submit to activate the setting. Video Clip: Select to send video clips when a trigger is activated.
  • Page 71 System log: Select to send a system log when a trigger is activated. Click Submit to activate the setting. When completed, click Submit to enable the settings to exit this page. The new media settings will appear on the Event Settings page. NOTE: To remove a media setting from the list (Application>...
  • Page 72 Event: Click on the Add button in the Event column to enter the “Event” setting page. Enter the Event name. Checkmark the “Enable this event” box and activate the function. Then set the Priority and the Source from the drop-down list. "Priority": The event with higher priority will be executed first.
  • Page 73 seconds when an event is triggered. Click on “Submit” to save or click on “Don’t Submit” to go back to the Event main page. Event settings: Click Add under the Event column on Event Settings page to open the Event setting page. On this page, you can arrange three parts –Trigger, Event Schedule, and Action to set an event.
  • Page 74 Digital input: This option allows the IP camera to use an external digital input device or sensor as a trigger source. Depending on your application, there are many choices of digital input devices on the market which helps to detect changes in temperature, vibration, sound, and light, etc. System boot: This option triggers the IP camera when the power to the IP camera is disconnected.
  • Page 75 Recording: Click on the Add button in the Recording column to enter the “Recording” setting page. Enter the Recording entry name. Checkmark the “Enable this recording” box and activate the function. Enable this option if you want to upload the recording to a shared folder in the network.
  • Page 76 Record settings: Click Add under the Record column on Event Settings page to open the Record setting page. In this page, you can define the recording source, recording schedule and recording capacity. A total of 2 recording settings can be configured. Enter the Record entry name for the event setting.
  • Page 77 5.1.3.6 Change the SD card Setting Please follow the steps below to change the SD card setting through the network as necessary. Change the SD card Setting. Please follow the steps below to change the setting via the network as necessary. Click on the “storage”...
  • Page 78 5.1.3.7 Device information The device information. This page displays all the information about your device and network connection. Click on the “Device info” button of the Status page to enter the “Device info” screen.
  • Page 79 The device information. This page displays the log information of your camera. Click on the “Device info” button of the Status page to enter the “Device info” screen. Click on the “Clear “ to erase all of the logs. You may also download the information by clicking “Download”.
  • Page 80 5.1.3.8 PPPoE & DDNS Using the PPPoE Install the XDSL software (obtained from your ISP dealer) in your PC. Search your IP camera's IP address: you can connect the IP camera and the Video monitor. The monitor screen will show the IP address on its right side. Turn off the DHCP function (of the IP camera) if it is “ON”.
  • Page 81 Test: Go to the Internet. Set your PC to enter the Internet. Desktop → IE browser → Enter the IP camera IP address (the same address as in the PPPoE settings and step 3 above) → You can see the IP camera images. DDNS settings Check your IP camera’s IP address (monitor) →...

  • Page 82: Advanced Operation

    6. ADVANCED OPERATION Question 1: How do I view the live images of the IP camera via the Microsoft Internet Explorer on the Desktop PCs or the laptop computers in a situation where there are no monitors or television? ◇The ways to get the IP address of an IP camera without a monitor are: UPnP and IP function.
  • Page 83 2. Click on the Dynamic DNS button on the left side of the page to enter the “Dynamic DNS” page. 3. Tick on the “Enable DDNS” to activate it. 4. Enter the DDNS Host Name, DDNS Account and DDNS Password which you created in the www.dyndns.com website.

  • Page 84: Specifications

    7. SPECIFICATIONS Sony IMX035 Mega-Pix Box IP-Camera Video sensor SONY 1.3M CMOS Sensor (IMX035) Auto Iris DC drive Video system 1/30 ~1/1000 sec Min. illumination 0.2 Lux @ F1.2 Day & Night Yes (Mechanical IR-Cut filter) Varifocal 2.9~8.2 mm, F1.0, DC iris, CS mount...

  • Page 85: Functions Of Client Pc

    8. Functions of client PC System requirement Windows XP Browser IE 6.x Live Monitor Max. 16 Split, Real Time REC/ Capture/ Audio/ Live Event/ Full Screen Playback Viewer Playback, Time / live event Search / Export (JPEG / AVI) Settings Device/ System/ Camera management/ web page Client PCs One camera can supports 8 simultaneous client PCs.

  • Page 86: Appendix 1. -How To Run Ip Camera Upnp

    APPENDIX 1. –How to run IP Camera UPnP ® The most troublesome issue when you setup an IP Camera is that you have no idea what the IP ® address of this device is. Now IP Camera supports the UPnP (Universal Plug and Play) protocol ®...
  • Page 87 Figure 2 Step 2: When Control Panel appears, double-click the Network Connections icon. The Network Connections dialog box appears. See Figure 3. Figure 3 Step 3: Click the Protocols tab in the Network Connections dialog box. See Figure 4. Figure 4 Step 4: When the Local Area Connection Properties dialog box shows up, choose Internet Protocol (TCP/IP) and click Properties.
  • Page 88 Figure 5 Step 5: In the Internet Protocol(TCP/IP) Properties dialog box, choose Use the following IP Address to indicate that you do not wish to use DHCP, and assign IP Address 192.168.1.200 with Subnet mask 255.255.255.0. Click OK when you finish it. See Figure 6. Figure 6 Step 6: Choose Close to finish the modification.
  • Page 89 2. Install UPnP Packets ® As described before, Microsoft Windows XP doesn’t start the UPnP service by default; however, we have to install some packets before we initialize it. The following steps will help you to install them. Step1: In the Start menu, point to Set Program Access and Default, and then click it. See Figure 8 Figure 8 Step 2: When the Add or Remove Programs dialog box appears, click the Add/Remove...
  • Page 90 Figure 10 Step 4: Check UPnP User Interface, and choose OK. See Figure 11. Figure 11 Step 5: When the original Network Component Wizard dialog box returns, click Next. See Figure12. Figure 12...
  • Page 91 Step 6: After about one minute the UPnP installation will be done, and choose Finish to close it. See Figure13. Figure 13 3. Turn on Services After installation, we should turn on the relative services to start the UPnP protocol. The following procedures will teach you how to do it.
  • Page 92 Figure15 Step 3: Click the Services icon in the Administrative Tools dialog box. See Figure16. Figure16 Step 4: When the Services dialog box shows up, double click the SSDP Discovery Service icon. See Figure17.
  • Page 93 Figure17 Step 5: Choose Automatic in the Startup type, and click OK to start it. See Figure18. Figure18 Step 6: When the Services dialog box appears again, double click the Universal Plug and Play Device Host icon. See Figure19.
  • Page 94 Figure19 Step 7: Choose Automatic in the Startup type, press the Start button, and click OK to start it. See Figure20. Figure20 Step 8: Restart your system.
  • Page 95 ® 4. Scan IP Cameras through My Network Place After you complete the installation and starting services, the UPnP protocol will take effect. You can ® scan all IP Cameras in My Network Place, as in Figure21 and Figure22 below. Figure21 Figure22 Just double click the UPnP IP Camera icon, and the video live stream will pop up automatically...

  • Page 96: Appendix 2. -The Arp Function

    APPENDIX 2. –The ARP function Setting the IP Address The Ethernet interface on the IP camera has a default IP address (192.168.1.168) that most likely needs to be changed to make it work on your local network. You need to acquire a unique IP address (ask your network administrator).
  • Page 97 ARP and ping from UNIX or GNU/Linux: Start a shell Type in the following as superuser (root): arp -s <IP address> <Ethernet address> [or arp -s <IP address> < MAC address>] ping <IP address> Example: arp -s 192.168.1.100 00-0C-0C-00-00-01 ping 192.168.1.100 The device responds to the ping in the examples above if the new address was configured.

  • Page 98: Appendix 3. -Register As A Ddns Member

    APPENDIX 3. –Register as a DDNS member The DDNS（Dynamic Domain Name System） is a function which is provided by an American company. Please refer to www.dyndns.com. This chapter provides the user with the basic instructions on how to register a free DDNS service. Registering for a DDNS Enter the URL www.dyndns.com.
  • Page 99 Figure 2 Figure 3 Click “My Services” to enter the service page. Please click the “Add Host Service” item which is below the ”My Hosts“ item, as shown in Figure 4. Click “Add Host Service”, and its service items will appear. The Add Dynamic DNS Host item helps to add a new DDNS.
  • Page 100 Figure 4 Figure 5 All we have to set in this page is the “Hostname” item. You can choose a Sub Hostname as you like from the right-hand side of the Hostname’s drop-down list. NOTE: You don’t have to set the “IP Address” in the same format as the camera’s IP Address.
  • Page 101 Figure 6...

  • Page 102: Appendix 4. -Table Of Mpeg4 Bit Rates For The Ip Camera

    APPENDIX 4. –Table of MPEG4 Bit Rates for the IP camera 1. When frame rate is higher than 15 frames/second (15 is not including): Highest High Medium Lowest FULL D1 2.63 2.25 1.75 1.31 0.88 2CIF 1.25 0.75 Half VGA 1.31 1.13 0.88...

  • Page 103: Appendix 5. -Poe Installation Method

    APPENDIX 5. –PoE Installation Method Warning: Please follow the steps in this instruction carefully. Connecting these adapters incorrectly may result in damage to your network devices. 1. Provided accessories: IP Box Camera Ethernet (CAT5 UTP/Straight Through) Cable Power over Ethernet Injector (input rating: DC 48V) AC Adapter (input: AC 100-240V;...
  • Page 104 2. IP Box Camera POWER+DATA IN: Connect a CAT 5 RJ-45 straight- through cable from the POWER+DATA OUT port on the Power over Ethernet Injector. 3. Power over Ethernet Injector POWER+DATA OUT: Provides the data and power to the IP Indoor POWER IN: Using the supplied 48V Mini-dome camera.
  • Page 105 4. Connecting the IP Box Camera: please take the following steps: Step 1: Insert one end of a Cat 5 Ethernet RJ-45 cable into the “LIN IN” port of the Power over Ethernet Injector. Connect the other end of the cable to your network switch or PC. Step 2: Plug one end of the Power adapter into the “POWER IN”...

  • Page 106: Appendix 6. -Faq

    APPENDIX 6. –FAQ 1. How do I disable the DHCP function and use a static IP instead? A：Turn up the “DIP SWITCH” from “3” to “4” and change the relative network settings, the IP Address, NetMask and Gateway on the image web page. 2.

Table of Contents