Using Cgi Sending; Using The Schedule Task - Sony Ipela Application Manual

Tip
You can specify the backup folder under Device setting
backup folder, on the General tab in Option from the
Tools menu.
5
Click Start upgrading.
Upgrading starts.
Notes
• To stop upgrading, click Stop upgrading.
To protect the device, once some devices start
upgrading, they cannot be canceled until the
upgrading is completed.
• Do not turn off the power until the device restarts after
upgrading.

Using CGI Sending

The CGI Sending function allows you to send CGI to a
device.
How to perform CGI Sending
1
From the Device list, select the camera to receive
CGI.
2
Right click the mouse. Click CGI Sending from
the displayed menu.
The CGI Sending screen is displayed.
3
Enter a command in the CGI command box.
4
Click Send.
The CGI command is sent to the selected camera(s)
in order of ID.
5
When sending is completed, click Save all
responses. Response content of all devices in the
list, to which a CGI command is sent, will be saved
in CSV format.

Using the Schedule Task

You can specify the time or interval to change the Device
setting or perform Firmware upgrade.
Click Task to display the Task List, which shows a list
of scheduled executable tasks.
Task List
Displays the list of scheduled executable tasks.
Add
Displays the Task Wizard.
Modify
You can edit a task.
Delete
You can delete a task.
Show Detail
Displays the detailed information on a task.
Start
This reserves a task.
Stop
You can cancel a task reservation.
Cancel
Closes the Task List.
Creating a task
1
Click Add.
19
Using the SNC toolbox