Colour System (Input2 Or Input3 Mode); Colour Temperature; Colour System - Sharp LC-20S5X Operation Manual

Basic Adjustment Settings (Continued)

COLOUR SYSTEM (INPUT2 or INPUT3 Mode)

Set the system to "AUTO" for normal reception. The "AUTO"
mode automatically detects the receiving signal system and
changes the reception system of the set. When the picture or
sound is not stable, switching to an appropriate system may
improve the picture or sound quality.
1
Press MENU to display the Menu screen.
• The Picture Menu screen can be displayed directly by
pressing Red.
2
Press \/| to select "PICTURE".
3
Press '/" to select "COLOUR SYSTEM", and press
OK.
4
Press '/"/\/| to select "AUTO", "PAL", "SECAM",
"N358", "N443" or "PAL60" and press OK.
A U T O
P A L
S E C A M
N 3 5 8
N 4 4 3
5
Press MENU to exit.
NOTE
• "COLOUR SYSTEM" is available only in the INPUT2 and INPUT3
modes.
16
P A L 6 0

Colour Temperature

Adjust the colour temperature to give a better white balance.
1
Press MENU to display the Menu screen.
• The Picture Menu screen can be displayed directly by
pressing Red.
2
Press \/| to select "PICTURE".
3
Press '/" to select "ADVANCED", and press OK.
4
Press '/" to select "COLOUR TEMP.", and press OK.
C O L O U R T E M P .
R E D [ ]
0
G R E E N [ ]
0
B L U E [ ]
0
R E S E T
5
Press '/" to select the desired item, and press OK.
U S E R
H I G H
M I D D L E
L O W
6
Press MENU to exit.
Selected item
USER Can set your desired colour*
HIGH White with Bluish tone
MIDDLE
LOW White with Reddish tone
* When you select "USER", the following items are adjustable.
Press \ \ \ \ \
Selected item
RED Weaker red
GREEN Weaker green
BLUE Weaker blue
NOTE
• When resetting "RED", "GREEN" and "BLUE" to factory preset
values, perform the following procedure.
1 Press '/" to select "RESET" in the "ADVANCED" menu, and
press OK.
2 Press '/" to select "YES", and press OK.
– +
– +
– +
Description
Press | | | | |
Stronger red
Stronger green
Stronger blue