Creating A Goto Route - Magellan eXplorist 100 Reference Manual

Routes

Creating a GOTO Route

The instructions here describe the most common and easiest way to create a GOTO
route.
1. Press GOTO.
Use the Arrow joystick to highlight Nearest or
2.
Alphabetical.
3. Press ENTER
4. Use the Arrow joystick to highlight the POI you want to
go to.
5. Press ENTER.
6. If you already have a GOTO you will be asked to
confirm the creation of this GOTO.
After you press ENTER, the last viewed navigation screen will be displayed, updated as
needed to provide information about the GOTO route you have created. On the Plotter
screen, a line will be drawn representing the GOTO route. The Compass screen will
change to display the name of the POI used as the destination in the screen header
bar and an icon representing the destination outside the diameter of the compass.
OakTree
CA
1.60mi
Heading Speed
o M
4.3
352
M H
Plotter screen with an
active GOTO route.
33