Marking A Position Using The Plotter Cursor - Magellan eXplorist 100 Reference Manual

Points of Interest

Marking a Position using the Plotter Cursor

This gives you a way of marking a position, other than your present position, by moving the
cursor around the plotter to a place where you want to create a POI.
1. While viewing the Plotter screen, use the Arrow joystick to put the eXplorist into
Cursor mode.
2. Continue moving the crosshair cursor until you are over the location where you want
to add a POI.
3. Press MARK.
4. [Optional] Use the Arrow joystick to highlight fields (icon, name, etc.) of the POI
that you want to edit. When you are done editing the field, press ENTER.
With Save highlighted, press ENTER.
5.
6. Press ESC to exit the Cursor mode and return to the Position mode.
27