Setting the access pause
You can insert a pause or change the length of
a pause to suit different access codes.
Code
0 2 4
0 2 5
0 2 0
0 2 1
2 5 3
The handset must be switched ON
Press the
button.
•
STO
Press #.
•
Press the
button
•
1
Enter the system code. (Factory setting is
•
0000.) Each digit you enter erases one dash
on the display.
Press the
button.
LNR
•
Enter one of the three digit codes above to
•
set the length of pause you want.
Press the
STO
button to confirm.
•
If you are experiencing problems, please call the
Diverse Helpline on 0345 908070.
PAUSE
1 second
2 second
3 second
6 second
To clear all
access codes
To put an outside call on hold and speak to
another, internal handset
You can make a consultation call to a colleague
and return to your existing, outside caller.
During the call:
RCL
Press the
button. You hear a dial tone.
•
RCL
Your outside caller is on hold.
Dial the phone extension number you want.
•
When the extension is answered you can
talk to your colleague without your outside
caller hearing.
Press the
button to return to your
•
RCL
outside caller.
To transfer an outside call
Please note that you may also need to consult
your PBX's user guide.
During the call:
RCL
Press the
button. You hear a dial tone.
•
RCL
Your outside caller is on hold.
Dial the phone extension number you want.
•
When the extension is answered you can
talk to your colleague without your outside
caller hearing.
Press the
button to transfer the call
•
PHONE
or replace the handset on the base unit or
charger.
Using your Diverse 1010
with a switchboard
23