BT DIVERSE 1010 User Manual page 15

To adjust the 'range warning' tone
If you are on a call as you reach the limit of
your handset's range, you will hear a tone to
warn you that you will lose the call if you move
further away. You can turn this sound on and
off. The factory setting is ON.
3 DEF 3
STO
Press the button.
• STO
Press then again. Display shows the
• 3 3
current setting
I = ON, O = OFF
Press to switch the tone ON
• 1
or
Press to switch the tone OFF.
• 0
Press the button to confirm the new
• STO
setting.
To adjust the 'in-range' tone
If you have taken the handset outside the
phone's range – provided the handset is
switched on – you will hear a tone when you
come back within range. You can turn this
sound on and off. The factory setting is ON.
5
3 DEF
STO
Press the button.
• STO
Press then . Display shows the current
• 3 5
setting
I = ON, O = OFF
Press to switch the tone ON
• 1
or
Press to switch the tone OFF.
• 0
Press the button to confirm the new
• STO
setting.
DEF
.
JKL
.
To reset your Diverse 1010 base unit to
the original factory settings
This will reset:
TONE/PULSE signalling to TONE
Access code/pause to NONE
Pause after the RCL key to NONE
Ring assignment to collective ringing.
It will also delete any new settings made for:
Connections to a switchboard.
This will NOT reset:
the system code
handset registration settings.
The handset must be switched ON
Press the button.
• STO
Press the # button.
•
Press the button.
• 1
Enter the system code. (Factory setting 0000.)
•
Press the button.
• LNR
Enter the code
• 2 5 0
Press the button to confirm.
• STO
.
Setting up
13