BT DIVERSE 1010 User Manual page 20

Using your
Diverse 1010
To transfer an external call between
handsets
If you are in a conversation with an outside
caller and want to transfer the call to another
handset.
INT RCL
Press the
• INT
. Your caller will hear a melodious tone.
INT
Enter the number of the handset to which
•
you want to transfer the call. When the
handset is answered, you can talk to the other
handset without the outside caller hearing.
To reconnect to your outside caller: Press
•
the button
RCL
or
To transfer the call: Press the
•
or replace the handset on the base unit.
Quick call transfer
After dialling the other handset, you can
immediately press the PHONE button, or place the
handset back on the base, and the call will be
transferred straight through. If the other handset is
already engaged, or does not answer the call within
30 seconds, the call will be returned to your handset.
Please note: If you go out of range of a base unit
for a long time while your handset is switched ON,
it may take more than 20 minutes to 'find' the base
station again when you come back within range.
However, by simply switching the handset OFF for
a moment, then ON again, it will find the base
station within a few seconds.
18
button. Display shows
PHONE
To put an outside caller on hold and speak
to another internal handset
INT
Press the
•
dial tone and your outside caller is put on
hold.
Press the handset number you want,
EXT •
When the handset answers, you can talk
without your outside caller hearing.
Press the
•
and speak to your outside caller.
Adjusting ear piece volume
The volume of received calls can be set to three
different levels ranging from normal to loud.
button,
To set the volume:
STO
Press the
•
Press the
•
displayed.
Press
• 1
Press
• 2
Press
• 3
Press the
•
The new volume setting has been entered.
RCL
button. You hear the internal
INT
button to end the internal call
RCL
0
button.
STORE
button the current setting is
0
button for normal.
button for louder.
button for loudest.
button.
STO
.
1-6
C
C
C