BT DIVERSE 1010 User Manual page 11

If the symbol flashes continuously, it means
the handset is either out of range or is not
registered with the base unit. To register, follow the
steps on page 24. All additional handsets you
purchase will need to be individually registered
with the base unit before they will work with the
Diverse 1010. The symbol may also f lash after
a power failure. Provided the handset has been
registered with the base, the
f lashing after a while indicating the handset has
automatically re-registered to the base unit.
If it continues to f lash, re-register the handset to
the base unit, see page 24.
10 Setting the TONE or PULSE
mode
Your Diverse 1010 is preset to TONE dialling –
where you hear a tone beep each time you dial
a number. Tone dialling is suitable for all
modern digital exchanges. If you cannot make
a call with TONE dialling, you may need to
switch to PULSE dialling.
To set PULSE dialling
STO
Press the button then the # button.
• STO
Press the button.
• 1
Enter the current system code.
•
(Factory setting 0000.)
Press the button.
• LNR
Press the buttons
• 0, 3, 3
Press the button to set pulse dialling.
• STO
symbol will stop
LNR
.
To re-set to TONE dialling
STO
Press the button then the # button.
• STO
Press the button.
• 1
Enter the current system code.
•
(Factory setting 0000.)
Press the button.
• LNR
Press the buttons
• 0, 3, 7
Press the button to set tone dialling.
• STO
To set Time Break Recall with Tone dialling
STO
Press the button.
• STO
Press the # button.
•
Press the button.
• 1
Enter the current system code.
•
(Factory setting 0000.)
Press the button.
• LNR
Press the buttons
• 0, 3, 7
Press the button.
• STO
To set to Earth Recall with Tone dialling
STO
Press the button.
• STO
Press the # button.
•
Press the button.
• 1
Enter the current system code.
•
(Factory setting 0000.)
Press the button.
• LNR
Press the buttons
• 0, 3, 6
Press the button.
• STO
LNR
.
LNR
.
LNR
.
Setting up
9