Buzzer Volume; Keypad Tone; Conductivity; Total Consumption - Miele TKG 450 WP Operating Instructions Manual

Settings menu

Buzzer volume

The buzzer can be set to be louder or
quieter.
The setting selected is shown in a bar
chart.
Factory default: a medium setting.
– Quieter       
– Louder       
You will hear the buzzer change as the
setting is selected.

Keypad tone

When this function is activated, a tone
will sound each time a button is
pressed.
Options
– On
– Off (the machine is delivered with this
option selected as standard)

Conductivity


Low This setting should only be
altered if the water is so soft that it is
likely to cause the electronics which
sense residual moisture in the
laundry to give false readings.
Options
– Normal (Factory default setting)
– Low
Condition for low conductivity setting
This programmable function should
only be set if the water used for
washing the laundry is extremely soft
76
with a conductivity reading (electrical
conductivity) less than 150 μS/cm.
Contact your local water authority for
the conductivity level of your mains
water supply.

Only activate the Low option if
the above condition is present.
Otherwise drying results will be
unsatisfactory.

Total consumption

You can display the total
consumption.
Options
– Display
The total consumption is displayed in
kWh.
– Reset function
The total consumption to date will be
deleted with the Reset option.