Settings menu
Buzzer volume
The buzzer can be set to be louder or
quieter.
The setting selected is shown in a bar
chart.
Factory default: a medium setting.
– Quieter
– Louder
You will hear the buzzer change as the
setting is selected.
Keypad tone
When this function is activated a tone
will sound each time a button is
pressed.
Options
– On
– Off (factory default)
Conductivity
The Low option should only be
selected if the residual moisture
reading in your laundry is incorrect
due to extremely soft water.
Options
– Normal (factory default)
– Low
Conditions
The Low option should only be set if the
water used for washing the laundry is
extremely soft with a conductivity read-
ing (electrical conductivity) of less than
74
150 μS. Contact your local water au-
thority for the conductivity level of your
mains water supply.
Only activate the Low option for
the conditions described above.
Otherwise drying results can be un-
satisfactory.
Total consumption
You can display the total consump-
tion.
Options
– Display
The total consumption is displayed in
kWh.
– Reset function
The total consumption to date will be
deleted with the Reset option.