Table of Contents
Advertisement
Settings menu
– Light
Clean out airways appears when
there is only a small build-up of fluff.
Buzzer volume
The buzzer can be set to be louder or
quieter.
The setting selected is shown in a bar
chart.
Factory default: a medium setting.
– Quieter
– Louder
You will hear the buzzer change as the
setting is selected.
Keypad tone
When this function is activated a tone
will sound each time a button is
pressed.
Options
– On
– Off (factory default)
Conductivity
The Low option should only be
selected if the residual moisture
reading in your laundry is incorrect
due to extremely soft water.
Options
– Normal (factory default)
– Low
82
Conditions
The Low option should only be set if the
water used for washing the laundry is
extremely soft with a conductivity
reading (electrical conductivity) of less
than 150 μS. Contact your local water
authority for the conductivity level of
your mains water supply.
Only activate the Low option for
the conditions described above.
Otherwise drying results can be
unsatisfactory.
Total consumption
You can display the total
consumption.
Options
– Display
The total consumption is displayed in
kWh.
– Reset function
The total consumption to date will be
deleted with the Reset option.
Advertisement
Chapters
Table of Contents
