Sofa/Bed Conversion; Rest Easy Multi-Position Lounge - Winnebago 2010 Meridian V Class Operator's Manual

Table of Contents

Advertisement

SECTION 9 –
FURNITURE AND SOFTGOODS
Reverse steps to convert back into dinette
seating.

SOFA/BED CONVERSION

Sofa to Bed
Lift the front edge of the sofa seat upward and
pull outward from the wall while gently pushing
downward on the backrest until the cushions lie
flat. The bed is now ready for use.
Bed to Sofa
Push the front edge of the seat toward the wall
while lifting upward on the backrest until the sofa
is fully seated against the wall.
REST EASY
MULTI-POSITION
®
LOUNGE
–If Equipped
9-4
NOTICE
Do not recline the lounge completely flat
unless the footrest section is extended.
To Recline
1. Press the switch on the front of the armrest.
Press "down" to recline; "up" to return
upright.
NOTE: Be sure house batteries contain adequate
charge. If the batteries are partially
discharged, the sofa may not fully recline
or return to the upright position.
To Extend Pull-Out Footrest
Section
1. Squeeze latch behind opening at top of lounge
face panel and pull footrest trundle section out
until it locks in the fully extended position.
2. Grasp the pull strap (located on the front edge
of the footrest) and lift footrest up and away
from lounge until it is raised into position.

Advertisement

Table of Contents
loading

Table of Contents