Sofa/Bed Conversion - Winnebago 2009 Adventurer Operator's Manual

1. Release both latches on the table leg to unlock.
2. Lift edges of the dinette cushions up and push
the dinette table straight down.
NOTE: You may find it easier to remove the
dinette cushions completely before
lowering the table, especially if just one
person is converting the dinette into bed
position.
3. Secure both latches on the table leg to lock in
lowered position.
4. Arrange dinette cushions to cover bed area.
FURNITURE AND SOFTGOODS
NOTE: Reverse steps to reassemble to dinette
configuration.
Round Table Leaf Extension
Lift the leaf extension upward then reach
beneath the tabletop and slide the support arms
outward to hold the extension. Reverse steps to
lower the extension.

SOFA/BED CONVERSION

Sofa to Bed
Lift the front edge of the sofa seat upward and
pull outward from the wall while gently pushing
downward on the backrest until the cushions lie
flat. The bed is now ready for use.
Bed to Sofa
Push the front edge of the seat toward the wall
while lifting upward on the backrest until the sofa
is fully seated against the wall.
SECTION 9 –
9-3