Sofa/Bed Conversion - Winnebago 2008 Ellipse Operator's Manual

SECTION 9 –
FURNITURE AND SOFTGOODS
2. Remove air bed mattress from its storage area
and set aside. Remove sofa seat cushions and
set aside.
3. Unfold bed frame from sofa seat and extend
legs from frame.
4. Place air mattress on top of bed frame, unfold
and inflate.
5. Arrange any sofa cushions as needed to
complete bed.
Bed to Sofa:
1. Exhaust air from mattress and fold, smoothing
out wrinkles as much as possible. Set aside.
2. Lift foot of bed frame and fold legs and bed
frame back into sofa seat.
3. Store mattress carefully beneath sofa seat to
avoid snags or punctures.
4. Place and arrange cushions on sofa seat.

SOFA/BED CONVERSION

(with Removable Armrests)
–If Equipped
Couch to Bed:
1. Remove the armrests from both ends of the
couch by lifting upward. A 'fin' on the
underside of the armrest holds it in place
between the cushion and side of the couch.
9-4
Remove armrest by pulling upward
Slide 'fin' on bottom of armrest down
between cushion and side of couch
2. Pull the front edge of the couch seat upward
and outward from the wall while gently
pushing downward on the backrest until the
cushions lie flat.
The bed is now ready for use.
Bed to Couch:
1. Push the front edge of the seat toward the wall
while lifting upward on the backrest until the
couch is fully seated against the wall.
2. Slide armests into place at each end of the
sofa.