Nicd, Nimh Batteries Charge/Discharge 9P - GRAUPNER S2007 Ultra DC Quad Operating Instructions Manual

⑧ Press INC button to access to CYCLE mode and press INC/DEC button to charge/dis-
charge sequence and repeating number and then press ENTER button to remove the
curser blinking.
LiPo CYCLE D->C1
D=3.0A
⑨ Press INC button to access STORE mode and press INC/DEC buttons to set charge/dis-
charge and then press ENTER button to remove the curser blinking.
LiPo
C=3.0A
⑩ Press INC button to access to BLANCER mode and check if the setup is correct.
LiPo
(03)CELL
⑪ Press INC button to access to TEMPERATURE mode and check if the setup is correct.
LiPo Temperature
◎ NiCd, NiMH BATTERIES CHARGE/DISCHARGE
- NiCd, NiMH charge
① Go to Nixx mode
Profile
Nixx
② Press INC button to access to CHARGE mode
Nixx
C=3.0A
③ Press ENTER button shortly then the value of charge current blinks, press DEC/INC
buttons to set the desired value of charge current.
Nixx
C=3.0A
D=1.0A
STORE
D=1.0A
BALANCER
START
40℃
[01]
5S 3000
CHARGE
d=25mV/c
CHARGE
d=25mV/c
9