Table of Contents
Advertisement
Mode – There are 2 types of mode: Minimum Bandwidth Guarantee and Maximum
Bandwidth Limit.
Bandwidth – Specifies the bandwidth you want to supply to this entry.
Description – Description of this entry.
Enable – Enable this entry. This entry won't be effective unless you check the Enable
box.
Click the Delete button to delete single entry.
Click the Delete All button to delete all entries.
Click the Save button to save all configuration.
For example, we assume that PC A, B, C are sharing the Internet with 2Mbps bandwidth
through one router. PC A is often for VoIP or online games, to guarantee its better
performance without interference from PC B and C, you can specify the minimum
bandwidth for PC A such as 100Kbps.
Note:
1.
The conversion relation of bandwidth: 1 Mbps = 1000Kbps.
2.
Please choose the Network Connection Type and set the bandwidth according to
your Network. If you are not clear about that, please contact with your ISP for help.
3.
IP address range for different entries could not have intersection with each other.
4.
After the configuration, click the Save button for the change to take effect.
4.10 IP & MAC Binding Setting
Figure 4-37 the IP & MAC Binding menu
There are two submenus under the IP &MAC Binding menu (shown in
Binding Setting and ARP List. Click any of them, and you will be able to scan or
configure the corresponding function. The detailed explanations for each submenu are
provided below.
4.10.1 Binding Setting
This page displays the IP & MAC Binding Setting table, you can operate it in accord with
your desire. (shown in Figure 4-38).
TL-R860
Cable/DSL Router User Guide
- 39 -
Figure
4-37):
Advertisement
Table of Contents
