Table of Contents
Advertisement
Description - This is the information about the rules such as address range.
Egress bandwidth - This field displays the max and mix upload bandwidth through the
Internet port, the default is 0.
Ingress bandwidth - This field displays the max and mix download bandwidth through the
Internet port, the default is 0.
Enable - This displays the status of the rule.
Modify - Click Modify to edit the rule. Click Delete to delete the rule.
To add/modify a Bandwidth Control rule, follow the steps below.
1.
Click Add New... shown in Figure 4-97, you will see a new screen shown in Figure 4-98.
2.
Enter the information like the screen shown below.
3.
Click the Save button.
4.17 IP & MAC Binding Setting
Figure 4-99 the IP & MAC Binding menu
TL-WDR3500
Figure 4-97 Bandwidth Control Rules List
Figure 4-98 Bandwidth Control Rule Settings
- 97 -
N600 Wireless Dual Band Router
Advertisement
Table of Contents
