Disassembly Of Parts - Indoor Unit; To Remove The Grille From The Chassis - Fisher FSArt-70HF Service Manual

10 Disassembly of parts – Indoor unit
Warning:
Disconnect the unit from power supply before investigating any faults.
Be sure the power is set to "OFF".

10.1 To remove the Grille from the Chassis.

1. Push the front panel up straightly, then lift it upward
to an angle of about 20°, do not force to open it more
larger.
2. Use the panel brace to support the front panel
and remain it open as shown in the picture.
3. Take hold of the handle of the air filter and lift it
up slightly to take it out from the filter holder,
then pull it downwards.
4. Open the lock then the front panel can unrig.
5. Remove the AIR FILTER from the indoor unit.
36
lock