Soft Reset; Factory Reset - dbx DriveRack VENU 360 Owner's Manual

Soft Reset

The Soft Reset function resets all Utility settings in the VENU360 back to their factory default state without resetting user
presets.
WARNING!
Performing the Soft Reset procedure will reset all analog input and output clip levels, clock source,
and XLR input format settings in the Utility menu back to their factory default state. These settings are global but are
also important for the correct operation of your presets. It is recommended that you take note of all these settings before
performing the Soft Reset procedure. This allows you to easily set them back after the Soft Reset has been performed.
To perform a Soft Reset:
Power down the VENU360.
1�
2� Press and hold the
Release UTILITY button" message appears in the LCD display then release the button.
Press the
3� WIZARD

Factory Reset

The Factory Reset function resets all user presets and Utility settings in the VENU360 back to their factory default state.
WARNING!
Performing the Factory Reset procedure will permanently reset all user presets and set all VENU360
settings back to their factory default state. This operation is irreversible.
To perform a Factory Reset:
Power down the VENU360.
1�
2� Press and hold the
RESET Release STORE button" message appears in the LCD display then release the button.
Press the
3� WIZARD
operation.
92
button then apply power to the VENU360. Keep the button help until the "SOFT RESET
UTILITY
button to perform the Soft Reset procedure. Pressing the
STORE button then apply power to the VENU360. Keep the button held until the "FACTORY
button to perform the Factory Reset procedure. Pressing the
button will cancel the operation.
UTILITY
button will cancel the
STORE