166
4-2. Driving procedures
Power (ignition) switch
Performing the following operations when carrying the electronic key on your
person starts the hybrid system or changes power switch modes.
Starting the hybrid system
Check that the parking brake is set.
1
Check that the shift lever is in P.
2
Firmly depress the brake pedal.
3
will be displayed on the multi-information display.
If it is not displayed, the hybrid system cannot be started.
Press the power switch.
4
If the "READY" indicator turns on, the
hybrid system will operate normally.
Continue depressing the brake pedal
until the "READY" indicator is illumi-
nated.
The hybrid system can be started from
any power switch mode.
Check that the "READY" indicator is
5
illuminated.
The vehicle will not move when the
"READY" indicator is off.
ES300h_OM_OM33B71U_(U)