Lexus ES300h Owner's Manual page 169

When the steering lock cannot be released
■
"Steering Lock active" will be displayed on the
multi-information display.
Check that the shift lever is set in P. Press the
power switch while turning the steering wheel
left and right.
Steering lock motor overheating prevention
■
To prevent the steering lock motor from overheating, the motor may be suspended if the
hybrid system is turned on and off repeatedly in a short period of time. In this case, refrain
from operating the hybrid system. After about 10 seconds, the steering lock motor will
resume functioning.
When "Check Access System with Elec. Key" is displayed on the multi-information dis-
■
play
The system may be malfunctioning. Have the vehicle inspected by your Lexus dealer
immediately.
If the "READY" indicator does not come on
■
In the event that the "READY" indicator does not come on even after performing the
proper procedures for starting the vehicle, contact your Lexus dealer immediately.
If the hybrid system is malfunctioning
■
P. 72
If the electronic key battery is depleted
■
P. 475
Operation of the power switch
■
When operating the power switch, one short, firm press is enough. If the switch is
●
pressed improperly, the hybrid system may not start or the power switch mode may not
change. It is not necessary to press and hold the switch.
If attempting to restart the hybrid system immediately after turning the power switch off,
●
the hybrid system may not start in some cases. After turning the power switch off,
please wait a few seconds before restarting the hybrid system.
If the smart access system with push-button start has been deactivated in a customized
■
setting
P. 521
Odometer and trip meter display
■
When the power switch is turned off, the odometer or trip meter display will extinguish
after approximately 30 seconds.
ES300h_OM_OM33B71U_(U)
4-2. Driving procedures
169
4