Reset Your Personal Cloud 2-Bay; Changing Device Services; Start And Stop A Service; Re-Index A Media Service - Seagate SRN21C User Manual

Reset your Personal Cloud 2-Bay

You can reset your device. A reset is not data-destructive. Performing these steps resets the
network settings and requires you to go through the initial setup process again.
The reset button is inside the casing on the back of your Personal Cloud 2-Bay.
1. Power off your Personal Cloud 2-Bay using the power button on the back of the device.
2. Wait approximately 15 seconds.
3. Power on your Personal Cloud 2-Bay.
4. Wait for the LED on the top of the device to show a steady, non-blinking white light.
5. Insert a paper clip or slim object into the hole on the back of your Personal Cloud 2-Bay
and press down the reset button for approximately 10 seconds.
6. Wait for the LED on the top of the device to show a steady, non-blinking white light.
7. Set up your device.

Changing Device Services

Your Personal Cloud 2-Bay is preconfigured with many services that allow you to stream to a
TV, use iTunes, download and upload files to your computer, and manage remote access.

Start and stop a service

1. Open the Device Manager.
2. Click Show advanced settings, and then click Services.
3. Move the cursor over the service until the Edit button appears on the right.
4. Click Edit and select Start or Stop.

Re-index a media service

If media files appear to be missing from your media service, you can re-index the service to
take an inventory of available multimedia files.
1. Open the Device Manager.
2. Click Show advanced settings, and then click Services.
3. Move the cursor over a media service until the Edit button appears on the right.
4. Click Edit and select Re-index.
Seagate Personal Cloud 2-Bay User Manual
Link the entire line to Open the Device Manager
Link the entire line to Open the Device Manager
28