Hard Drive Maintenance
If a drive on your Seagate Personal Cloud 2-Bay fails, and you have configured your device
for maximum protection, you can replace it; your content is safe on the other drive.
Important:
Refer to the warranty before performing hardware repairs or maintenance not
described in this manual.
http://www.seagate.com/support/warranty-and-replacements/limited-consumer-warranty)
Precautions
Link entire line to Precautions
Remove a hard drive
Install a hard drive
Precautions
•
Except for replacing a hard drive, performing maintenance within the enclosure is not
supported and can void your product's warranty.
•
During operation, the drives should remain in place for optimal airflow.
•
Observe all conventional ESD precautions when handling the Personal Cloud 2-Bay's
parts. Avoid contact with backplane components and module connectors, etc.
•
Replace an existing or faulty hard drive with a hard drive of equal capacity.
•
When handling hard drives, make sure that they are placed (and stored) on a cushioned
surface.
Remove a hard drive
Disconnect power from the device before removing a hard drive.
Seagate Personal Cloud 2-Bay User Guide
(link "Warranty" to
Link entire line to Remove a hard drive
Link entire line to Install a hard drive
33