Figure 30 Front Half Of Unpopulated Main Bay; Figure 31 Orient Disk Drive Carrier Handle To Rear - Seagate Exos CORVAULT Hardware Installation And Maintenance Manual

3. Locate the main bay cover's front latch, then release it by pressing the latch away from the front panel and toward
the hinge, resting the open half of the cover on the closed half.

Figure 30 Front half of unpopulated main bay

4. Select the first disk drive from the static-protected area you used when unpacking the storage enclosure.
5. Go to the right side of the open storage enclosure, so that the auxiliary bay is to the top of your workspace.
6. Prepare to fill the main bay from top to bottom for each lateral bay, progressing from front to back.
7. Release the disk driver carrier latch to open the carrier, then hold the handle so it is toward the rear of the slot.

Figure 31 Orient disk drive carrier handle to rear

8. Insert the first disk drive in the leftmost top slot closest to the auxiliary bay.
38 Chapter 3 Initial installation