Table of Contents
Advertisement
Pairing Chest Transmitter to Console
1.
From sleep mode press any key, this will activate the console.
2.
Press and hold Set key
symbol.
3.
For automatic pairing press Mode Key
digit code below the stated heart rate. (For heart rate pairing you must be
wearing the chest belt and move to within 12" (30cm) to the console
marked with the ANT+ symbol.
4.
Once heart rate has been paired press Set key
data settings, and adjust the digit using the up key
key
For ANT+ chest transmitter the code is alphanumeric; if an analogue 5.3Khz
transmitter is used 4 zero digits (0000) will appear.
Once the chest transmitter and console have been paired, the heart rate
reading will appear in the middle frame of the display. If pairing is unsuccess-
ful after 20 seconds, or if heart rate reading is incorrect, move closer to the
console and press Mode key
STAR TRAC Group Cycle Computer Installation
Installation & Instructions
this will display heart rate and ANT+
to repeat the procedure.
22
this will display a four
to input personal
or down
19
Hide quick links:
Advertisement
Table of Contents
