Schwinn Cadence Pro Installation Instructions Manual page 13

AC PERFORMANCE PLUS
Tools Required
• 3mm Hex Key
• Philips Screw Driver
• Cadence Pro Computer Kit PN 740-8803
1.Take the Cadence Pro Computer and silicone seal (Fig. 1). Line up the silicone seal
to the proper holes and apply it to the Cadence Pro Computer. (Fig. 2).
Fig. 1
2. Place the one-ring mount on the back of the computer. Insert and tighten the
three mount screws (Fig. 3). Remove the screw that holds the loop together (Fig. 4)
Fig 3
Chain or Carbon Blue
Fig. 2
Fig 4
13