The Back Panel - TP-Link Archer D20 User Manual

Chapter 1
1 3 2

The Back Panel

The modem router's back panel shows the connection ports, buttons and antennas.
Refer to the following for detailed instructions.
Item
ADSL
USB
WiFi ON/OFF
WPS/RESET
LAN1, LAN2, LAN3,
LAN4/WAN
POWER ON/OFF
POWER
Antennas
For connecting the modem router to the Internet. Connect the port to the
splitter or directly connect the port to the phone jack via a phone cable. For
details, please refer to Connect the Modem Router.
For connecting to a USB storage device or a USB
For turning on/off the Wi-Fi function.
The switch for the WPS and RESET function. RESET: There are two ways to
reset the modem router's factory defaults.
Method one: With the modem router powered on, use a pin to press and hold
the RESET button for at least 8-10 seconds. And the modem router will reboot
to its factory default settings.
Method two: Restore the default settings from Backup & Restore of the
modem router's Web-based Management.
For connecting the modem router to your PC or other Ethernet network
devices. In wireless router mode you will be able to connect to Cable/FTTH/
VDSL/ADSL devices.
The switch for the power. Press it to power on or off the modem router.
For connecting the modem router to power socket via the provided power
adapter.
Used for wireless operation and data transmit. Upright them for the best Wi-Fi
performance.
Get to Know About Your Modem Router
Description
printer.
7