Set System Time And Region - TP-Link Archer D20 User Manual

Chapter 13
13 1

Set System Time and Region

System time is the time displayed while the modem router is running. The system time
you configure here will be used for other time-based functions like Parental Controls
and Wireless Schedule. You can manually set how to get the system time.
Follow the steps below to set your system time.
1 Visit http://tplinkmodem.net, and log in with the password you set for the modem
router.
2
Go to Advanced
3
Select your Region
function of the device can be used. It may be illegal to use the wireless function
of the device in a region other than regions specified in the list. If your country or
region is not listed, please contact your local government agency for assistance.
4
Configure the system time using the following methods :
Manually: Select your time zone and enter your local time.
Get from PC: Click this button if you want to use the current managing PC's time.
Get GMT: Click this button if you want to get time from the Internet. Make sure your
modem router can access the Internet before you select this way to get system
time.
5 Click Save to make your settings effective.
6 After setting the system time, you can set
needs. Tick the checkbox to enable
then click Save to make the settings effective.
> System Tools > Time Settings
from the drop-down list. The region is where the wireless
Daylight
Administrate Your Network
page.
Daylight Saving time according to your
Saving, set the start and end time and
79