Scanning 1D Bar Codes; Keyboard Entry - Symbol P360 Quick Reference Manual

6
• Corded scanning scans and transmits data, via cable, to the host.
• Batch (uncorded) scanning scans and stores data. To transmit batched data to
the host, press the <FN>1 key combination, then insert the scanner in its
cradle, or attach its cable.
The scanner automatically switches between these applications by monitoring for
the presence of a cable.
If you are not using one of the default applications, consult the Phaser Series
Scanner Product Reference Guide (p/n 70-33629-xx) for programming
instructions. If necessary, contact your local supplier or the Symbol Support
Center for assistance.

Scanning 1D Bar Codes

If using the scanner in corded mode, ensure all cable connections are secure.
1.
Otherwise, ensure the battery is charged.
Ensure the bar code is in the correct scanning range. Aim and press the
2.
trigger. When the scanner reads the symbol:
a beep sounds.
-
the LED above the display turns green.
-
the red laser turns off.
-

Keyboard Entry

Instead of scanning a bar code, enter the bar code data using the keypad on the
top of the scanner.
• To enter numeric characters, press the number key on the keypad.
• To enter alpha characters, press the Mode key once to put the scanner in
Alpha Mode. Press the numeric key that contains the appropriate letter; press
once for the first letter, quickly twice for the second letter and quickly three
times for the third letter.
• To return to numeric mode, press the Mode key again.
The * key is a special key that can be programmed for custom specific operations.
For more information, see the System Administrator.
P360/460 Memory Scanners