Tire Service Kit Components And Operation; Tire Service Kit Usage Precautions - Jeep Compass 2015 Operating Information Manual

Tire Service Kit Components And
Operation
Tire Service Kit Components
1 — Sealant 5 — Mode Select Knob
Bottle
2 — Deflation 6 —
Button (Clear)
3 — Pressure 7 — Air Pump Hose
Gauge (Black)
4 — Power But- 8 — Power Plug (located
ton on the bottom side of the
Tire Service Kit)
Using The Mode Select Knob And Hoses
Your Tire Service Kit is equipped with the fol-
lowing symbols to indicate the air or sealant
mode.
Selecting Air Mode
Selecting Sealant Mode
Sealant Hose
Push in the Mode Select Knob (5)
and turn to this position for air
pump operation only. Use the
Black Air Pump Hose (7) when
selecting this mode.
Push in the Mode Select
Knob (5) and turn to this
position to inject the Tire
Service Kit Sealant and
to inflate the tire. Use
the Sealant Hose (clear
hose) (6) when select-
ing this mode.
Using The Power Button
Push and release the Power But-
ton (4) once to turn On the Tire
Service Kit. Push and release the
Power Button (4) again to turn Off
the Tire Service Kit.
Using The Deflation Button
Press the Deflation Button (2) to
reduce the air pressure in the tire if
it becomes over-inflated.

Tire Service Kit Usage Precautions

• Replace the Tire Service Kit Sealant Bottle
(1) and Sealant Hose (6) prior to the expira-
tion date (printed at the lower right hand
corner on the bottle label) to assure optimum
operation of the system. Refer to "Sealing a
Tire with Tire Service Kit" section (F) "Sealant
Bottle and Hose Replacement".
221