Engine Oil Change Indicator System - If Equipped - Jeep Compass 2015 Operating Information Manual

The system allows the driver to select informa-
tion by pressing the following buttons mounted
on the steering wheel:
EVIC Steering Wheel Buttons
• MENU Button
Press and release the MENU but-
ton to scroll through the main
menus (Fuel Economy, Warnings,
Timer, Units, System, Personal
Settings) or to exit submenus.
124
• COMPASS Button
Press and release the COMPASS
button to display one of eight com-
pass readings and the outside tem-
perature or to exit submenus.
• RIGHT arrow Button
Press and release the RIGHT ar-
row button for access to main
menus, submenus or to select a
personal setting in the setup menu.
• DOWN Button
Press and release the DOWN but-
ton to scroll downward through the
submenus.
Engine Oil Change Indicator System
— If Equipped
Oil Change Required
Your vehicle is equipped with an engine oil
change indicator system. The "Oil Change Re-
quired" message will display in the EVIC display
for approximately five seconds after a single
chime has sounded, to indicate the next sched-
uled oil change interval. The engine oil change
indicator system is duty-cycle based, which
means the engine oil change interval may fluc-
tuate dependent upon your personal driving
style.
Unless reset, this message will continue to
display each time you turn the ignition switch to
the ON/RUN position. To turn off the message
temporarily, push and release the Trip Odom-
eter button on the instrument cluster. To reset
the oil change indicator system (after perform-
ing the scheduled maintenance) refer to the
following procedure.
1. Turn the ignition switch to the ON position.
Do not start the engine.
2. Fully push the accelerator pedal, slowly,
three times within 10 seconds.
3. Turn the ignition switch to the OFF/LOCK
position.