Polycom 331 Owner's Manual page 54

7. Press the Ok or Cancel soft keys to accept or cancel changes.
8. Press to display the next field in the contact's entry.
9. Repeat steps 4 to 8 to enter the last name of the contact.
10. Repeat steps 4 to 8 to enter a contact number.
This is a required field and it must be unique (not already in the
directory).
Entry to this field is number as denoted by
11. Repeat steps 4 to 8 to change the Speed Dial Index if desired.
It is automatically assigned to the next available index value.
12. Repeat steps 4 to 8 to change the Ring Type and Divert
Contact if desired.
These fields may be left blank.
For more information on diverting contacts, refer to Diverting
Calls on page Diverting Calls.
13. Repeat steps 4 to 8 to change the Auto Reject, Auto Divert,
Use , ,
Disabled settings.
For more information on setting the Auto Reject field, refer to
Rejecting Calls on page Rejecting Calls.
14. Press to end contact's data entry.
15. Press the Yes or Cancel soft keys to accept or cancel changes.
16. Press repeatedly to return to the idle display.
54
, o r to switch between Enabled and
.