Reverse Side - Samsung DM82E-BR User Manual

Reverse Side

― The colour and shape of parts may differ from what is shown. Specifications are
subject to change without notice to improve quality.
RS232C IN
RS232C
OUT
IR /
AMBIENT
SENSOR IN
RGB / DVI /
HDMI / AV /
COMPONENT
AUDIO IN
AUDIO
OUT
SD CARD
USB
(5V 1A)
USB
(5V 1A) /
TOUCH IN
DVI /
MAGICINFO IN
DP IN
HDMI IN 1
TRAY IN RGB IN
HDMI IN 2
IR
TOUCH OUT RJ45
COMPONENT IN OUT
Port Description
RS232C IN
Connects to MDC using an RS232C adapter.
RS232C OUT
IR / AMBIENT SENSOR IN
Supplies power to the external sensor board or receives the light sensor signal.
RGB / DVI / HDMI / AV / Receives sound from a PC via an audio cable.
COMPONENT AUDIO IN
AUDIO OUT
Connects to the audio of a source device.
SD CARD Connect to an SD memory card.
USB (5V 1A) Connect to a USB memory device.
― The USB ports on the product accept a maximum constant current of 1A. If the
maximum value is exceeded, USB ports may not work.
USB (5V 1A) / TOUCH IN
USB
TOUCH IN: This must be connected to the cable if the Touch is in use.
DVI / MAGICINFO IN
DVI: Connects to a source device using a DVI cable or HDMI-DVI cable.
MAGICINFO IN: Use the (dedicated) DP-DVI cable when connecting a network box (sold
separately).
DP IN
Connects to a PC using a DP cable.
HDMI IN1 / HDMI IN 2
Connects to a source device using an HDMI cable.
TRAY IN Connects to the Tray, found on the front of the product, using the OCM cable.
RGB IN Connects to a source device using a D-SUB cable.
TOUCH OUT
Connects the Touch to a PC.
AV IN / COMPONENT IN
Connects to a source device using the AV/Component adapter.
IR OUT Receives the remote control signal via the external sensor board and outputs the signal via
LOOP OUT.
RJ45 Connects to MDC using a LAN cable.
(5V 1A): Connects to a USB device. Make sure the Touch is not in use.
20