Table of Contents
Advertisement
Reverse Side
― The color and shape of parts may differ from what is shown. Specifications are
subject to change without notice to improve quality.
IR /AMBIENT
SENSOR IN
HDMI IN 3
HDMI IN 2
HDMI IN 1
DP IN 3
(UHD 30Hz)
DP IN 2
(UHD 60Hz)
DP IN 1
(UHD 60Hz)
DVI IN /
MAGICINFO IN
USB
RJ45
IR OUT
RS232C OUT RS232C IN
RGB IN
AUDIO OUT
RGB / DVI /
HDMI /
AUDIO IN
Port
IR /AMBIENT SENSOR IN
HDMI IN 1, HDMI IN 2, HDMI IN 3
DP IN 3 (UHD 30Hz)
DP IN 2 (UHD 60Hz)
DP IN 1 (UHD 60Hz)
DVI IN / MAGICINFO IN
RJ45
IR OUT
RS232C OUT
RS232C IN
USB
RGB IN
AUDIO OUT
RGB / DVI / HDMI / AUDIO IN
Description
Supplies power to the external sensor board or receives the light sensor signal.
― If you connect an external IR that has the illumination sensor function to
Eco Sensor
the QMD-BR model, the
starts to operate.
Connects to a source device using a HDMI cable or HDMI-DVI cable.
Connects to a PC using a DP cable.
― Obtain sharp picture quality when viewing UHD content at 30 Hz.
― The recommended resolution for the DP IN 3 (UHD 30Hz) port is 3840 x
2160 @ 30 Hz. The resolution can be changed to the optimal resolution of
3840 x 2160 @ 30 Hz, if required.
Connects to a PC using a DP cable.
― Obtain sharp picture quality when viewing UHD content at 60 Hz.
DVI IN: Connects to a source device using a DVI cable or HDMI-DVI cable.
MAGICINFO IN: To use MagicInfo, make sure to connect the DP-DVI cable.
Connects to MDC using a LAN cable.
Receives the remote control signal via the external sensor board and outputs the
signal via LOOP OUT.
Connects to MDC using an RS232C adapter.
Connects to a USB device when upgrading software.
Connects to a source device using a D-SUB cable.
Connects to the audio of a source device.
Receives sound from a PC via an audio cable.
18
Advertisement
Table of Contents
