Connecting The Power Supply Unit; Connecting Procedure - Epson TM-U220 Reference Manual

3.3.3 Connecting the Power Supply Unit

Use the power supply or equivalent for your printer as listed below.
TM-U220 Alphanumeric model (Type A,B, D)
AC Adapter C (which is packed with ANK model)
or PS-180 (Which is provided as option)
Note:
The AC Adapter packed in the carton box of ANK model cannot be used for the Multilingual model.
The "AC adapter, C," which is packed with the alphanumeric model, cannot be used with the
multilingual* model. Be sure to use the "PS-180" with the multilingual* model. If the "AC adapter, C,"
packed with the alphanumeric model, is connected to the multilingual* model by mistake, the printer
might not operate correctly. For example, printing might stop before all the lines are printed or the printer
might print the same line repeatedly.
*Multilingual means the printer model that can print any one of the following: Japanese Kanji, Simplified
Chinese, Traditional Chinese, Thai characters, or Korean characters.
WARNING:
Make sure you use the AC Adapter C or EPSON PS-180 power supply or equivalent.
Don't use the PA-#### or PB-#### power supply unit with TM-U220.
Using an incorrect power supply may cause fire or electrical shock.
CAUTION:
When connecting or disconnecting the power supply from the printer, make sure the
power supply is not plugged into an electrical outlet. Otherwise you may damage the
power supply or the printer.

3.3.3.1 Connecting procedure

1. Make sure the printer's power switch is turned off and the power supply's power cord is
unplugged from the electrical outlet.
2. Check the label on the power supply to make sure the voltage required by the power supply
matches that of your electrical outlet.
Rev. E
TM-U220 Technical Reference Guide
TM-U220 Multilingual model (Type A,B, D)
PS-180 (which is packed with Multilingual model)
Setup 3-13