Inserting The Smartcard; Trusted Platform Module (Tpm) (Device-Dependent) - Fujitsu STYLISTIC Q665 Operating Manual

We recommend that you always use two SmartCards. Always keep one of the SmartCards
in a safe place if you are carrying the other SmartCard with you.
In order to be able to take advantage of all the security features of your Tablet
PC, you will need a CardOS SmartCard from Fujitsu.
The SmartCard can only be used with a PIN, offering maximum protection even if
you lose the SmartCard. In order to maximise your security, the CardOS SmartCard
is disabled if three incorrect attempts are made to enter the PIN.
When you use the CardOS SmartCard for the first time, you will either need to enter the
preset PIN "12345678" or the PIN given to you by your systems administrator.

Inserting the SmartCard

Depending on the selected model, your device may be equipped with a SmartCard reader.
Do not use force when inserting and removing the SmartCard.
Make sure that foreign objects do not fall into the SmartCard reader.
► Push the SmartCard into the SmartCard reader (1) with the chip facing the rear of the Tablet PC.

Trusted Platform Module (TPM) (device-dependent)

TPM Trusted Platform Module
To use the TPM, you must activate the TPM in the BIOS Setup before the software
is installed. The condition for this is that you have assigned at least the supervisor
password (see "Security functions", Page
Fujitsu
1
52).
Security functions
57