Setting Up The Cradle; Connecting The Tablet Pc To The Cradle - Fujitsu STYLISTIC Q665 Operating Manual

Setting up the cradle

Select a suitable location for the cradle before setting it up. Follow
the instructions below when doing so:
• Place the cradle on a flat, stable, nonslippery surface.
• Never place the cradle and the mains adapter on a heat-sensitive surface.
• Do not expose the cradle to extreme environmental conditions.
• Protect the cradle from dust, humidity and heat.

Connecting the Tablet PC to the cradle

It is possible to connect the Tablet PC to the cradle during operation.
Disconnect the mains adapter from the Tablet PC before connecting
the Tablet PC to the cradle.
If the Tablet PC is connected to the cradle, you must connect the
mains adapter to the cradle.
cradle
► Remove the power plug of the mains adapter from the mains socket.
► Pull the mains adapter cable out of the DC jack (DC IN) of the Tablet PC.
Fujitsu
Accessories for your Tablet PC (optional)
45